Product Name: MV-19E/MV-25E pneumatic PET plastic steel belt balers Products: MV-19E/MV-25E pneumatic PET plastic steel belt balers MV-19E/MV-25E data: Place of Origin: Japan Machine weight: 3.8kg tightening force: 2800N plastic steel width: MV-19E: 13mm-19mm MV-25E: 16mm-25mm plastic steel strip thickness: 0.5mm-1.3mm packaged bonding strength: about 75% bite deduction: friction hot melt adhesive operation : pneumatic pull with friction hot melt use air pressure: 0.5-0.7MPA (normal use in 6kg appropriate) performance characteristics: (1) light weight, only 3.8kg. ② device with unthreading away with easily. ③ with clamps, for cranes suspension of the spring. The ④ tightening strong up to 2800N. ⑤ bonding time, cooling time and the size of the tightening force can be adjusted. ⑥ particularly suitable for the packaging of a round face, surface, and only a very small surface area of ??irregularly shaped objects. ⑦ drawstring and cut with a double bond parallel design, tightening, bonding, cut finished in one simple operation. Applicable industries: metallurgy, steel, wire, wood, paper, cardboard boxes, and a variety of flat or round face objects packaging. It works: This tool friction hot melt type through the high-speed friction overlapping plastic with heat adhesive, so called friction hotmelt. 2, the compressed gas is introduced to the cylinder piston, the piston with the vibrator upper is connected by a shaft bolt. Vibrator forth vibration and friction plates are pressed together, so that the overlapping portions of the binding tape adhesive. 3, the vibrator Central has an oval hole, FAN the eccentric shaft of the motor is rotated back and forth in this hole. 4, the high-speed rotation of the air motor, maximum speed of 10,000 rpm, makes the vibrator as the pendulum general high-speed movement.